Stainless Steel 410S Refractory Lining Hexagonal Mesh | 30mm thickness | 14Ga strips | 60mm hexagonal hole | China HESLY
Hexagonal metal mesh is a flexible mesh gratings that are easily rolled and conform to circular shapes. It is used in reinforcing linings, floors, and any cement structures needing added support. The structural strength of the anchor section helps its range of applications. Some applications include ductwork, heaters, reactors, and furnaces. See below for a full list of applications.
Applications of Hex-mesh
Hexagonal metal mesh refractory lining, or refractory furnace lining, is a hexagonal cellular mesh grating specifically designed for reinforcing both linings and flooring. It acts as a surface framework to hold cement or refractory in position and relieves stress in the lining’s upper crust, which prevents spalling and cracking. As a result of hex metal’s strength and unique design, abrasion and corrosion are retarded and refractory life is significantly extended. Even hot gaseous substances cannot erode the refractory because they are reflected away from the surface by the metal cellular grid.
 | |
| Hexsteel: Bonding Hole Type Instead of lance tabs, holes are punched through the walls of the hexmetal cell. Refractory can then flow through these holes to achieve a bond from one cell to another. | Hex-metal: Pronges/Lances Type this style has lance tabs protruding from the walls of the hexagonal cell to act as anchorage for the refractory. |
Application of HESLY Hex mesh
- As refractories, hex steel mesh has Flexibility, high strength and erosion resistant characteristics. Hex steel mesh is an excellent choice of refractory linings in furnaces, reactors, cyclones, ducts and flues. It is mainly used in power plant, cement plant, Steel, petroleum, chemical industry, power generation and other large devices. The hex metal can largely improve the heat erosion and abrasion resistance.
- Hex mesh used for floors, hex mesh provides long term protection for armor applications in industrial floors. Specifically: Loading docks, ramps, high traffic aisles for forklifts and trucks, hot floors for foundry, forge and steel mills, refuse disposal plant floors and almost anywhere floors are subject to severe impact and rolling loads will benefit with Hex mesh.
- Since Hex Metal's flexibility allows it to be rolled, it easily conforms to circular shapes. It is ideal for lining Ducts, Furnaces, Reactor Vessels, Cyclones, Flue Gas Lines and other high temperature equipment of virtually any shape or configuration. Hex metal and flex metal refractory linings are both flexible, mesh grating used in reinforcing linings, floors and any cement structures needing added support.
Typical Service Temperature
| Anchorage Material | Chemical Composition | Typical Service Temperature |
| AISI | DIN | C% | Si% | Mn% | P% | S% | Cr% | Ni% | others |
| 304 | 1.4301 | ≤0.08 | ≤1.00 | ≤2.00 | ≤0.45 | ≤0.30 | 18.0—20.0 | 8.0—10.0 | N | 800℃ |
| 316 | 1.4401/1.4436 | ≤0.08 | ≤0.75 | ≤2.00 | ≤0.45 | ≤0.30 | 16.0—18.0 | 10.0—14.0 | N:Mo | 800℃ |
| 321 | 1.4541 | ≤0.08 | ≤0.75 | ≤2.00 | ≤0.45 | ≤0.30 | 17.0—19.0 | 9.0—12.0 | Ti | 800℃ |
| 310S | 1.4845 | ≤0.08 | ≤1.50 | ≤2.00 | ≤0.45 | ≤0.30 | 24.0—26.0 | 19.0—22.0 | — | 1150℃ |
| Inconel 601 | 2.4851 | ≤0.10 | ≤0.50 | ≤1.00 | — | ≤0.15 | 21.0—25.0 | 58.0—63.0 | Al:Cu | 1200℃ |
| Inconel 800 | 1.4876 | ≤0.10 | ≤1.00 | ≤1.50 | ≤0.45 | ≤0.15 | 19.0—23.0 | 30.0—35.0 | Al:Ti | 1200℃ |
| 410S | 1.4001 | ≤0.08 | ≤1.00 | ≤1.00 | ≤0.40 | ≤0.30 | 11.5—13.5 | ≤0.60 | — | 750℃ |
| CARBON STEEL | VARIOUS | 550℃ |
Common Specification Sheet
| ITEM | SPECS | B | A | AF |
| 1 | 1.2 X 10 X 50mm | 1.2mm | 10mm | 40mm |
| 2 | 1.2 X 15 X 50mm | 1.2mm | 15mm | 50mm |
| 3 | 1.2 X 20 X 50mm | 1.2mm | 20mm | 50mm |
| 4 | 1.5 X 10 X 50mm | 1.5mm | 10mm | 50mm |
| 5 | 1.5 X 15 X 50mm | 1.5mm | 15mm | 50mm |
| 6 | 1.5 X 20 X 50mm | 1.5mm | 20mm | 50mm |
| 7 | 1.8 X 15 X 50mm | 1.8mm | 15mm | 50mm |
| 8 | 1.8 X 20 X 50mm | 1.8mm | 20mm | 50mm |
| 9 | 1.8 X 25 X 50mm | 1.8mm | 25mm | 50mm |
| 10 | 2.0 X 15 X 50mm | 2.0mm | 15mm | 50mm |
| 11 | 2.0 X 20 X 50mm | 2.0mm | 20mm | 50mm |
| 12 | 2.0 X 25 X 50mm | 2.0mm | 25mm | 50mm |
| 13 | 2.0 X 30 X 50mm | 2.0mm | 30mm | 50mm |
| 14 | 2.0 X 30 X 80mm | 2.0mm | 30mm | 80mm |
| Remark | A/F | Min: 40mm Max: 100mm |
| | MATERIAL | A3 ,0Cr13,1Cr13,SS304,SS316,1Cr18Ni9Ti,SS310S |
Hexmetal Gallery
Photo Gallery - HESLY Hexsteel Mesh | |
| Refractory Hexagonal Mesh | Carbon Steel Hexmetal |
| |
| Hexsteel Refractory Linings | Hexmetal MeshChina Factory |
Package and Delivery
| | |
| China Hexmesh Factory | China Hexmetal Exporter |
