Flex Metal for Refractory Linings | AISI 309S| Hexagonal Cellular mesh grating | Hesly Metal Mesh- China

Flexmetal is the direct counterpart of Hexmetal. It performs all the same functions as Hexmetal, it’s design however, allows free form rolling to diameters as small as possible without the need for any power forming equipment.

Structure of HESLY Flex Metal

Flex Metal Grid for Refractory Linings is made from shaped metal flat wires connected with rods so that flexibility of the panels is guaranteed in one direction, thus enabling installation without prior rolling. This characteristic means that Flexmetal can also be installed on cylinders with very small diameters,such as cyclone diplegs, ducts, fan casings and small cylinders. Flexmetal is always available in rolls of standard height 1020 mm in AISI 304H, 410S and 310S. On request, Flexmetal can be supplied in other materials and in rolls of different widths.

Features and Assets of HESLY Flex Metal

It fully complements dense hydraulic and chemically bonded refractories in resisting erosion.

• Superior retention for erosion resistant refractories
• Aids erosion resistance
• Specified by name in the Refining and Petrochemical industries
• Used in over 60 countries worldwide and still arguably the best
• British manufactured to client specification
• Long life expectancy
• Manufacturer and install options

Used by the Refining; Petrochemical; Cement; Iron & Steel; Incineration; Bio-Energy and Power Generation industries

Flex metal refractory lining is the direct counterpart of hex metal, it performs all the same functions of reinforcement of thin wall refractory linings, while its design allows free form rolling to very small diameters.

Hexmesh: Bonding Hole Type Instead of lance tabs, holes are punched through the walls of the hexmetal cell. Refractory can then flow through these holes to achieve a bond from one cell to another.	Hex-mesh: Pronges/Lances Type this style has lance tabs protruding from the walls of the hexagonal cell to act as anchorage for the refractory.

Common Specification Sheet

ITEM	SPECS		B	A	AF
1	1.2 X 10 X 50mm		1.2mm	10mm	40mm
2	1.2 X 15 X 50mm		1.2mm	15mm	50mm
3	1.2 X 20 X 50mm		1.2mm	20mm	50mm
4	1.5 X 10 X 50mm		1.5mm	10mm	50mm
5	1.5 X 15 X 50mm		1.5mm	15mm	50mm
6	1.5 X 20 X 50mm		1.5mm	20mm	50mm
7	1.8 X 15 X 50mm		1.8mm	15mm	50mm
8	1.8 X 20 X 50mm		1.8mm	20mm	50mm
9	1.8 X 25 X 50mm		1.8mm	25mm	50mm
10	2.0 X 15 X 50mm		2.0mm	15mm	50mm
11	2.0 X 20 X 50mm		2.0mm	20mm	50mm
12	2.0 X 25 X 50mm		2.0mm	25mm	50mm
13	2.0 X 30 X 50mm		2.0mm	30mm	50mm
14	2.0 X 30 X 80mm		2.0mm	30mm	80mm
Remark	A/F	Min: 40mm Max: 100mm
	MATERIAL	A3 ,0Cr13,1Cr13,SS304,SS316,1Cr18Ni9Ti,SS310S

HESLY Hexmesh Typical Service Temperature:

Anchorage Material		Chemical Composition								Typical Service Temperature
AISI	DIN	C%	Si%	Mn%	P%	S%	Cr%	Ni%	others
304	1.4301	≤0.08	≤1.00	≤2.00	≤0.45	≤0.30	18.0—20.0	8.0—10.0	N	800℃
316	1.4401/1.4436	≤0.08	≤0.75	≤2.00	≤0.45	≤0.30	16.0—18.0	10.0—14.0	N:Mo	800℃
321	1.4541	≤0.08	≤0.75	≤2.00	≤0.45	≤0.30	17.0—19.0	9.0—12.0	Ti	800℃
310S	1.4845	≤0.08	≤1.50	≤2.00	≤0.45	≤0.30	24.0—26.0	19.0—22.0	—	1150℃
Inconel 601	2.4851	≤0.10	≤0.50	≤1.00	—	≤0.15	21.0—25.0	58.0—63.0	Al:Cu	1200℃
Inconel 800	1.4876	≤0.10	≤1.00	≤1.50	≤0.45	≤0.15	19.0—23.0	30.0—35.0	Al:Ti	1200℃
410S	1.4001	≤0.08	≤1.00	≤1.00	≤0.40	≤0.30	11.5—13.5	≤0.60	—	750℃
CARBON STEEL		VARIOUS								550℃

Hexmesh Gallery

Photo Gallery - HESLY Hexmesh Anchors

Stainless Steel Hexmetal	316 Hexmetal China
Hexsteel Refractory Linings	Hex Steel Mesh China Factory

Package and Delivery

​
China Hexmesh Factory	China Hexmetal Exporter

HESLY CHINA HEXMESH & ANCHORS FACTORY
	+86 188 3181 6606 (whatsapp/wechat)
	+86-318-7888900
	+86-318-7888900
	info@hesly-group.com
	www.hex-mesh.com